move keyhive exclusive boards into /keyhive (#16084)

Co-authored-by: Nick Brassel <nick@tzarc.org>

keyboards/keyhive/absinthe/readme.md

@@ -10,6 +10,6 @@ A budget-friendly F-rowless TKL with a rotary encoder
 
 Make example for this keyboard (after setting up your build environment):
 
-    make absinthe:default
+    make keyhive/absinthe:default
 
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/keyhive/ergosaurus/readme.md

@@ -10,6 +10,6 @@ An Arduino Pro Micro driven Alice-clone PCB. Supports all Alice-style cases, giv
 
 Make example for this keyboard (after setting up your build environment):
 
-    make ergosaurus:default
+    make keyhive/ergosaurus:default
 
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/keyhive/honeycomb/readme.md

@@ -8,13 +8,13 @@ These configuration files use a completely different 'matrix scan' system than o
 Run the following command in your terminal:
 
 ```
-make honeycomb:default
+make keyhive/honeycomb:default
 # or use this to automatically flash the controller
-make honeycomb:default:avrdude
+make keyhive/honeycomb:default:avrdude
 ```
 
 Follow the QMK guide for this or ask in Discord.
 
 ### Other Keymaps
 
-Because this is a totally custom macropad, it is recommended that you copy the `default/` folder, rename it as desired, and modify the `keymap.c` to your liking.
+Because this is a totally custom macropad, it is recommended that you copy the `default/` folder, rename it as desired, and modify the `keymap.c` to your liking.

keyboards/keyhive/lattice60/readme.md

@@ -10,12 +10,12 @@ A HHKB layout keyboard using only through-hole components.
 
 Make example for this keyboard (after setting up your build environment):
 
-    make lattice60:default
+    make keyhive/lattice60:default
 
 To activate the USBasploader bootloader, hold the BOOT button down during power on or reset. LED2 should light up to indicate that the bootloader is active.
 
 Flash the firmware using the `make` command with the `flash` parameter, example below:
 
-    make lattice60:default:flash
+    make keyhive/lattice60:default:flash
 
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/keyhive/navi10/readme.md

@@ -10,10 +10,10 @@ A simple and fun navigation cluster macropad with exposed components.
 
 Make example for this keyboard (after setting up your build environment):
 
-    make navi10:default
+    make keyhive/navi10:default
 
 Make example for a specific revision (ex. rev2):
 
-    make navi10/rev2:default
+    make keyhive/navi10/rev2:default
 
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/keyhive/navi10/rules.mk

@@ -0,0 +1 @@
+DEFAULT_FOLDER = keyhive/navi10/rev3

keyboards/keyhive/opus/readme.md

@@ -10,6 +10,6 @@ The columns are angled to follow the natural angle of the hand.
 
 Make example for this keyboard (after setting up your build environment):
 
-    make opus:default
+    make keyhive/opus:default
 
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

keyboards/keyhive/smallice/readme.md

@@ -10,7 +10,7 @@ A 40% alice-like keyboard with an arrow cluster.
 
 Make example for this keyboard (after setting up your build environment):
 
-    make smallice:default
+    make keyhive/smallice:default
 
 ### Flash
 

keyboards/keyhive/southpole/readme.md

@@ -8,6 +8,6 @@ Hardware Supported: Teensy 2.0
 
 Make example for this keyboard (after setting up your build environment):
 
-    make southpole:default
+    make keyhive/southpole:default
     
-See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).