ebb512db82
* Clean up `DEBOUNCE` in config.h, 0-9 * Clean up `DEBOUNCE` in config.h, A * Clean up `DEBOUNCE` in config.h, B * Clean up `DEBOUNCE` in config.h, C * Clean up `DEBOUNCE` in config.h, D * Clean up `DEBOUNCE` in config.h, E * Clean up `DEBOUNCE` in config.h, F * Clean up `DEBOUNCE` in config.h, G * Clean up `DEBOUNCE` in config.h, H * Clean up `DEBOUNCE` in config.h, handwired * Clean up `DEBOUNCE` in config.h, I * Clean up `DEBOUNCE` in config.h, J * Clean up `DEBOUNCE` in config.h, K * Clean up `DEBOUNCE` in config.h, L * Clean up `DEBOUNCE` in config.h, M * Clean up `DEBOUNCE` in config.h, N * Clean up `DEBOUNCE` in config.h, O * Clean up `DEBOUNCE` in config.h, P * Clean up `DEBOUNCE` in config.h, Q * Clean up `DEBOUNCE` in config.h, R * Clean up `DEBOUNCE` in config.h, S * Clean up `DEBOUNCE` in config.h, T * Clean up `DEBOUNCE` in config.h, U * Clean up `DEBOUNCE` in config.h, V * Clean up `DEBOUNCE` in config.h, W * Clean up `DEBOUNCE` in config.h, X * Clean up `DEBOUNCE` in config.h, Y * Clean up `DEBOUNCE` in config.h, Z * Remove default debounce from info.json * Migrate non-default debounce to info.json
Cascade
60% universal hotswap/solder PCB with USB-C that supports multiple commonly used layouts.
- Keyboard Maintainer: Studio Kestra
- Hardware Supported: Most GH60-style keyboards, more info at studiokestra.ca/cascade
- Hardware Availability: RNDKBD.com
Bootload Sequence
There are 3 ways to put the board in bootloader mode:
- Hold the top-left key (typically
Esc) while plugging in the USB cable, OR - While the PCB is plugged into the PC, press the physical
RESETbutton on the back of the board, OR - With the default layout, toggle Layer 1 and press the
ESCkey.
Compiling Firmware
Make example for this keyboard (after setting up your build environment):
make studiokestra/cascade:default
See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.